Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
2. CAUTION: Make sure the parking lever actuating rod is correctly seated into the case parking rod guide cup.
Install the extension housing.
1
Position the extension housing.
2
Install the extension housing screws.
3
Install the extension housing studs.
3. Install the transmission mount.
1
Position the transmission mount on the extension housing.
2
Install the transmission mount-to-extension housing screws.
4. Install the transmission mount into the crossmember and tighten the transmission mount nuts.
5. NOTE: Align the driveshaft with the marks made during removal to ensure correct balance.
Align and install the rear driveshaft.
