Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Valve Body: Service and Repair
Removal and Installation
Main Control Valve Body
Special Tools
Special Tool(s)
Removal
1. with the vehicle in NEUTRAL, position it on a hoist.
2. NOTE: If equipped, the transmission servo heat shield needs to be unclipped from the fluid pan rail and positioned out of the way for fluid pan
removal.
If equipped, loosen the nut and position the heat shield out of the way.
3. Drain transmission fluid.
-
Remove all the transmission fluid pan screws except for two in the front. Loosen the two front transmission fluid pan screws. Pry the rear of
the transmission fluid pan down and allow fluid to drain. After fluid is drained remove the front two transmission fluid pan screws.