Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
9. NOTE: Do not remove the pinion bearing cups from the differential housing unless the cups are damaged.
Using the special tools, remove the outer pinion bearing cup.
10. Using the special tools, remove the inner pinion bearing cup.
Installation
1. NOTE: This step and the following step show the preferred method for installing the pinion bearing cups. An alternate method is shown
following these two steps.
Position the special tools and the inner and outer pinion bearing cups in their respective bores.
1
After placing the inner and outer pinion bearing cups in their bores, place the special tool on the inner pinion bearing cup.
2
Place the special tool on the outer pinion bearing cup.
3
Install the special tool.
2. Tighten the special tool to seat the pinion bearing cups into their bores.
