Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Back Window Glass: Service and Repair
Fixed
REMOVAL
1. Remove the C-pillar trim panel.
2. Remove the 15 rear window glass nuts and remove the rear window glass.
3. Remove the excess foam butyl from the window opening.
INSTALLATION
1. To install, reverse the removal procedure.
^
Apply 6 mm (0.23 in) Foam Butyl or equivalent meeting Ford specification WSB-M2G234-C to the rear window glass.
^
Start at the bottom middle and work around the window opening.
NOTE: When applying foam butyl, leave a slight overlap at the bottom to allow for drainage.
