Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Quarter Window Glass: Service and Repair
Fixed
REMOVAL
1. Remove the quarter trim panel.
2. Remove the rear quarter window glass.
1
Remove the nuts.
2
Push the rear quarter window glass outward to release the butyl seal.
3. Remove the excess foam butyl from the window opening.
INSTALLATION
1. Apply 6 mm (0.23 in) Foam Butyl or equivalent meeting Ford specification WSB-M2G234-C to the rear quarter window glass frame.
^
Start at the bottom middle and work around the frame.
NOTE: When applying foam butyl, leave a slight overlap at the bottom to allow for drainage.
2. Install the rear quarter window glass.
1
Position the rear quarter window glass.
2
Tighten the nuts.
3. Install the quarter trim panel.
NOTE: Loosely install the nuts before tightening.
