Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
Rear Door Window Glass: Service and Repair
Heavy Duty Riverter
SPECIAL TOOL(S)
REMOVAL
1. Remove the rear door trim panel.
2. Remove the interior glass weatherstrip.
3. Remove the rear door belt line moulding nut.
4. Remove the rear door belt line moulding.
CAUTION: Do not strike or force the front door belt line moulding during the installation. The front door belt line moulding is made of
aluminum and will be damaged.
NOTE: During installation, make sure that the front door belt line moulding fits flush with the edge of the sheet metal and the door panel shelf.
