Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
^
If equipped, disconnect the electrical connector.
5. Remove the sun visor clips.
1
Remove the sun visor clip screws.
2
Remove the sun visor clips.
6. Lower the front portion of the headliner.
7. Remove the cowl grille.
8. Remove the upper windshield weatherstrip.
9. Remove the LH and RH windshield mouldings.
10. Using a soft brush or vacuum, remove any dirt or foreign material from the pinch weld.
11. Using the special tool, cut the urethane adhesive from the windshield glass starting at the top center and work toward the bottom corners.
