Explorer Sport Trac 2WD V6-4.0L VIN E (2002)
2. Turn the rear wiper switch OFF.
NOTE: This step makes sure that the wiper motor is in the park position.
3. On early build vehicles, position the rear wiper blade outside the wiper arm stop.
4. Install the wiper pivot arm onto the wiper motor.
^
Tighten retaining nut.
NOTE: Early build shown, late build similar.
5. Connect the washer hose to the elbow with elbow positioned between the 9:00 and 12:00 o'clock positions.
NOTE: Early build shown, late build similar.