Explorer Sport Trac 2WD V6-4.0L VIN K (2007)
Antenna Cable: Service and Repair
Antenna Cable - Satellite Radio
ANTENNA CABLE - SATELLITE RADIO
Removal and Installation
1. Remove the RH A-pillar trim panel.
2. Disconnect the satellite antenna electrical connector.
-
Separate the satellite radio antenna cable pin-type retainers from the A-pillar and instrument panel.
3. Lower the glove compartment.
-
Open the glove compartment door.
-
Press the tabs inward and lower the glove compartment.
4. Disconnect the satellite radio antenna cable from the satellite radio receiver.
5. To install, reverse the removal procedure.