Explorer Sport Trac 2WD V6-4.0L VIN K (2007)
Second Row, 40 Percent E-Z Entry Backrest (Part 2)
Disassembly and Assembly
1. Remove the second row, 40 percent E-Z entry seat from the vehicle.
2. Remove the second row, 40 percent E-Z entry seat backrest.
3. Using an appropriate tool, push in the hole of each head restraint guide while lifting up and remove the head restraint.
4. CAUTION: Use care when separating the seat back trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the backrest foam pad.
Release the hook-and-loop strips, invert the trim cover as high as it will go.
5. From between the backrest foam pad and the backrest frame, reach up, pinch the ends together and remove the 2 head restraint guides.
6. Remove the backrest trim cover.
7. Separate the backrest foam pad from the backrest frame.
8. To assemble, reverse the disassembly procedure.
Seat Backrest - Second Row, 60 Percent, E-Z Entry
SEAT BACKREST - SECOND ROW, 60 PERCENT, E-Z ENTRY
