Explorer Sport Trac 2WD V6-4.0L VIN K (2007)
10. NOTE: The cable ends are color coded/keyed to the levers.
Position each keyed cable end to the outboard recliner lever and rotate to the locked position.
-
Install the cable casing to the outboard recliner.
11. Install the outboard recliner inner cover.
12. NOTE: The outboard recliner inner cover has been removed for clarity.
Position the outboard recliner release pivot stub into the recliner shaft and install the 2 outboard recliner-to-cushion frame bolts.
-
Tighten to 55 Nm (41 lb-ft).
13. Install the outboard recliner short cable to the latch feet assembly outboard foot and attach all cable casing retainers.