Explorer Sport Trac 2WD V6-4.0L VIN K (2007)
Expansion Block/Orifice Tube: Service and Repair
EVAPORATOR CORE ORIFICE
Special Tool(s)
Special Tool(s)
Removal
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning system except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
1. Recover the refrigerant.
2. NOTE: The evaporator core orifice access fitting is located in the condenser-to-evaporator line below the powertrain control module.
Disconnect the evaporator core orifice access fitting.
-
Discard the O-ring seal.
3. Inspect the evaporator core orifice for damage before attempting to remove it from the line.