Explorer Sport Trac 2WD V6-4.0L VIN K (2007)
J10-J14
Normal Operation - All Vehicles
When the brake pedal is applied, the stoplamp switch routes voltage to the smart junction box (SJB), the brake shift interlock actuator, the trailer
electric brake controller, the four wheel drive (4WD) control module, the anti-lock brake system (ABS) module, and the powertrain control module
(PCM) through circuit CCB08 (VT/WH). The voltage is then routed out of the SJB to the high mounted stoplamp through circuit CCB08 (VT/WH).
Normal Operation - Explorer, Explorer Sport Trac
When the SJB detects the brake pedal applied, the SJB provides voltage to the LH and RH rear stoplamps through circuits CLS18 (GY/BN) and
CLS19 (VT/OG), respectively.
Normal Operation - Mountaineer
When the SJB detects the brake pedal applied, the SJB provides voltage to the LH and RH rear stoplamps through circuit CLS44 (VT/BN).
