Explorer Sport Trac 2WD V6-4.0L VIN K (2007)
Wheel Hub: Service and Repair
Rear
Wheel Bearing and Wheel Hub
Special Tool(s)
Removal and Installation
CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in
major service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement
part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of
these parts.
1. Remove the wheel knuckle.
2. Remove the 3 brake disc shield bolts.
^
To install, tighten to 8 Nm (71 inch lbs.)
3. Using the special tool and a suitable press, remove the wheel hub.
