Explorer Sport Trac 2WD V6-4.0L VIN K (2007)
Removal
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of
the power steering components can result.
1. Using a suitable suction device, drain the power steering fluid reservoir.
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
3. Remove the power steering pump pulley.
4. Remove the pressure line bracket-to-engine bolt.
5. Remove the power steering fluid reservoir-to-pump hose bracket bolt.
6. Release the reservoir-to-pump hose clamp and disconnect the hose.
7. Disconnect the pressure line-to-pump fitting.
