Explorer Sport Trac 2WD V8-4.6L (2008)
Removal and Installation
1. Remove the front door trim panel handle bezel cover.
2. Remove the front door trim panel handle bezel screws.
3. Remove the front door trim panel lower screws.
CAUTION: To avoid damaging the front door trim panel, do not pull the bottom of the panel outward.
4. Remove the front door trim panel by lifting upward on the armrest to disengage the panel clips.
5. Disconnect the electrical connectors.
6. Disconnect the lock rod cable from the front door trim panel.
7. Disconnect the door handle conduit and cable from the front door trim panel.
8. To install, reverse the removal procedure.