Explorer Sport Trac 2WD V8-4.6L (2008)
10. CAUTION: Make sure the safety belt webbing is not twisted prior to installation or damage may occur.
Position the safety belt anchor to the inboard recliner and install the safety belt anchor bolt.
-
Tighten to 55 Nm (41 lb-ft).
11. Position the inboard recliner outer cover and install the 2 screws.
-
Make sure the kneeling mechanism release cable pivot is still positioned on the inboard recliner and the recliner pin is through the cable pivot
before installing the inboard recliner outer cover.
12. Install the second row, 60 percent E-Z entry seat into the vehicle.
13. Cycle the backrest down and then back to the upright position. Make sure the inboard and outboard recliners simultaneously and securely lock in
the upright position.
40 Percent, Bench
SEAT BACKREST - SECOND ROW, 40 PERCENT, BENCH
Exploded View
