Explorer Sport Trac 2WD V8-4.6L (2008)
11. CAUTION: Do not remove the Timing Chain Wedge tool at any time during assembly. If the special tool is removed or out of placement,
the engine front cover must be removed and the engine must be retimed.
CAUTION: The timing chain must be installed in its original position onto the camshaft phaser and sprocket using the scribed marks, or
damage to valves and pistons will result.
Scribe a location mark on the timing chain and the camshaft phaser and sprocket assembly.
12. CAUTION: Remove the front thrust camshaft bearing cap straight upward from the bearing towers or the bearing cap may be damaged
from side loading.
Remove the 2 bolts and the RH cylinder head camshaft front bearing cap.