Explorer Sport Trac 2WD V8-4.6L (2008)
6. Disconnect the auxiliary harness electrical connector.
7. Disconnect the auxiliary mode door actuator electrical connector.
8. Remove the 3 auxiliary mode door actuator screws.
9. Remove the auxiliary mode door actuator.
10. To install, reverse the removal procedure.
Vacuum Control Motor - Defroster Door
VACUUM CONTROL MOTOR - DEFROSTER DOOR
Removal and Installation
1. Remove the audio control module (ACM).
2. Remove the lower steering column cover.
3. Remove the 3 center panel duct screws and position the center panel duct aside.
4. Remove the 2 plenum chamber screws.
