Explorer Sport Trac 2WD V8-4.6L (2008)
Installation
1. CAUTION: Do not install a power steering pump pulley that has been removed and installed twice or pulley failure and/or pump damage
may occur. Inspect the pulley for paint marks in the web area near the hub. If there are 2 paint marks, discard the pulley and install a
new one. If there is 1 paint mark or no paint marks, use a paint pencil to mark the web area of the pulley near the hub.
Using the special tool, install the pulley.
2. Rotate the tensioner and install the engine accessory drive belt on the power steering pump pulley.
3. Install the engine air cleaner outlet pipe.
