Explorer Sport Trac 2WD V8-4.6L (2008)
5. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side safety canopy module electrical connector.
6. Connect the driver side safety canopy module electrical connector.
7. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger side safety canopy module electrical connector.
8. Connect the passenger side safety canopy module electrical connector.
9. Install the driver and passenger upper C-pillar trim panels.
Explorer and Mountaineer vehicles
10. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side safety canopy module electrical connector.
