Explorer Sport Trac 2WD V8-4.6L (2008)
16. Connect the main transmission electrical harness by pushing it in and twisting the outer shell to lock it in place.
17. NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place and the selector lever
cable end is snapped onto the ball stud. Press the selector lever cable into the bracket and listen for the selector lever cable to click into place. Pull
back on the selector lever cable to make sure that it is locked into the selector lever cable bracket. Also, make sure that the selector lever cable end
is correctly installed onto the ball stud. Pull back on the selector lever cable to make sure that the selector lever cable end is correctly installed.
Connect the selector lever cable onto the ball stud and move the locking tab down.
^
Listen for the audible click.
^
Pull back on the selector lever cable to make sure that it is correctly installed.
18. Install the selector lever cable shield.
