Explorer Sport Trac 2WD V8-4.6L (2008)
10. WARNING: Do not drive vehicle until the urethane seal has cured. Follow urethane manufacturer's curing directions. Inadequate or
incorrect curing of the urethane seal will adversely affect glass retention. Failure to follow these instructions may result in serious injury
to vehicle occupant(s).
CAUTION: Before positioning the quarter window glass, open vehicle windows to prevent the air pressure of closing doors from
affecting the adhesive bond.
Using the alignment marks made previously, position the quarter window glass on the pinch weld.
11. NOTE: The urethane adhesive must cure for a minimum of one hour before testing for air and water leaks.
After the urethane adhesive has cured, check for water leaks and add urethane adhesive where needed.
12. Install the wiring harness brackets.
13. Install the rear quarter trim panel.
14. Clean the exterior and interior of the quarter window glass with glass cleaner.
