Explorer Sport Trac 2WD V8-4.6L (2008)
-
To install, tighten to 10 Nm (89 lb-in).
4. Remove the window regulator cover-to-motor bolt.
-
To install, tighten to 10 Nm (89 lb-in).
5. Remove the window regulator cover.
6. Remove the 2 window regulator mounting nuts.
-
To install, tighten to 10 Nm (89 lb-in).
7. Remove the 2 window regulator-to-window bolts.
-
To install, tighten to 11 Nm (8 lb-ft).
8. Disconnect the electrical connector.
9. Remove the window regulator.
10. To install, reverse the removal procedure.
-
Initialize the rear window regulator motor. For additional information, refer to Window Motor Initialization - Rear. See: Power Window
Motor/Back Window Motor/Testing and Inspection