Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Antenna Cable: Service and Repair
REMOVAL
NOTE: Antenna lead-in runs from audio unit to connector behind glove box.
1. Remove the audio unit.
2. Remove the antenna lead-in cable.
1
Open the glove box door.
2
Release the tabs and lower the glove box door to the full open position.
3
Release the antenna lead-in cable clips.
4
Disconnect the connector.
5
Separate the antenna cable from the lead-in cable and remove the lead-in cable.
INSTALLATION
1. To install, reverse the removal procedure.
