Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Brake Shoe: Service and Repair
Shoes
Removal
1. Remove the brake drum.
2. Inspect the rear brake assembly for the following:
^
the rear wheel cylinder for excessive leakage that can contaminate brake system parts, and rebuild as necessary.
^
the rear brake shoes and linings for contamination, and install new shoes and linings as necessary.
^
the rear brake shoes and linings for minimum thickness, above the backing plate or rivets, and install new as necessary.
^
the springs for heat discoloration, and install new as necessary.
^
the adjusting lever contact with the brake adjuster screw.
3. NOTE: To aid installation, note the locations of the short and long brake shoe retracting springs.
Remove the brake shoe retracting springs.
1
Remove the long brake shoe retracting spring.
2
Remove the short brake shoe retracting spring.