Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
COMPONENT TESTING PROCEDURE (Voltage Applied)
Disconnect the ohmmeter; connect pin 6 using a fused (10A) jumper to 12V DC power and pin 9 to ground. Measure the voltage between pin 8 and
pin 9 while rotating the thumbwell from full illumination to no illumination. If the voltage smoothly decreases from near 12 volts to near 0 volts, the
illumination dimmer is okay. If not, replace the main light switch.
