Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
8. Remove the two driver air bag module retaining bolts.
9. Remove the driver air bag module.
1. Disconnect the driver air bag module electrical connector.
2. Remove the driver air bag module.
10. Connect the restraint system diagnostic tool 418-F088 to the driver air bag module electrical connector at the clockspring.
11. Open the glove compartment door to access the passenger air bag module mounting screws.
12. Remove the two screws.
13. CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment door.
Reaching one hand into the glove box opening, push out on the passenger air bag module and separate it from the instrument panel.