Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
3. Remove the lower steering column opening finish panel.
1
Remove the two retaining screws from the lower steering column opening finish panel.
2
Pull out to release the retaining clips and remove the lower steering column opening finish panel.
4. Remove the retaining bolts and remove the lower steering column opening finish panel reinforcement.
5. Disconnect the clockspring electrical connector at the base of the steering column.
6. Attach the restraint system diagnostic tool to the vehicle harness side of the clockspring electrical connector.
7. Remove the passenger air bag module.