Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
4. Remove the retaining bolts and remove the lower steering column opening finish panel reinforcement.
5. Disconnect the clockspring electrical connector at the base of the steering column.
6. Attach the restraint system diagnostic tool to the vehicle harness side of the clockspring electrical connector.
7. Remove the passenger air bag module.
8. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag electrical connector.
9. Connect the battery ground cable.
10. Move and tilt the front seats to their highest and most forward position.
11. Disconnect the battery ground cable and wait at least one minute.
WARNING:
^
TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BACKUP POWER SUPPLY MUST BE
DEPLETED BEFORE REPAIRING OR REPLACING ANY FRONT OR SIDE AIR BAG SUPPLEMENTAL RESTRAINT
