Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
10. Remove the driver seat rear bolt trim covers.
11. Remove the driver seat rear bolts.
12. Remove the driver seat from the vehicle.
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may result
in damaged components.
13. Remove the tie-strap and disconnect the passenger seat side air bag electrical connector.
14. Attach the restraint system diagnostic tool to the passenger seat side air bag floor electrical connector.
15. Position the passenger seat rearward.
16. Remove the passenger air bag module.
