Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
13. Install the passenger seat rear track bolt covers.
14. Using the special tool, install the safety belt buckle support assembly bolt.
15. Install the safety belt buckle support assembly bolt cover.
16. Remove the restraint system diagnostic tool from the driver seat side air bag floor electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE CAN RESULT IN INJURY AND POSSIBLE VIOLATION OF VEHICLE
SAFETY STANDARDS.
