Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
24. Remove the front safety belt guide.
1
Using the special tool, remove the front safety belt guide bolt.
2
Remove the front safety belt guide.
25. Release the tabs and remove the safety belt guide bolt cover from the safety belt guide.
26. Position the carpet aside at the front safety belt anchor.
27. Remove the front safety belt anchor.
1
Using the special tool, remove the front safety belt anchor bolt.
2
Remove the front safety belt anchor.
28. Through the front door opening, remove the quarter trim panel front screw.
1
Position the rear seat back part of the way down (the seat back bar is shown).
2
Peel the carpet back between the rear seat and the quarter trim panel.
