Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Refrigerant Pressure Sensor / Switch: Description and Operation
Air Conditioning High Pressure Switch
The A/C pressure cutoff switch is used to interrupt A/C compressor operation in the event of high system discharge pressures.
-
The A/C pressure cutoff switch is mounted on a Schrader valve-type fitting on the high pressure side of the A/C manifold and tube.
-
A valve depressor, located inside the threaded end of the A/C pressure cutoff switch, presses on the Schrader valve stem.
-
This allows the A/C pressure cutoff switch to monitor the compressor discharge pressure.
-
When the compressor discharge pressure rises, the switch contacts open, disengaging the A/C compressor. When the pressure drops, the contacts
close to allow operation of the A/C compressor. Refer to specifications regarding operating pressure(s).
-
It is not necessary to Perform the Refrigerant Discharging and Recovery Procedure to remove the A/C pressure cutoff switch.
