Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Starter Drive/Bendix: Testing and Inspection
Starter Drive and Flywheel Ring Gear Inspection
1. Remove the starter motor. Refer to Starter Motor.
2. Check the wear patterns on the starter drive gear and the flywheel ring gear. If the wear pattern is abnormal, install a new starter motor, refer to
Starter Motor.
3. If the starter drive gear and the flywheel ring gear are not fully meshing and both of the gears are scored or damaged, install a new starter motor,
refer to Starter Motor. If necessary, install a new flywheel.
