Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Front Steering Knuckle: Service and Repair
Special Tool(s)
Removal
1. Remove the wheel hub.
2. Remove the torsion bar cover plate.
1
Remove the retaining bolts.
2
Remove the torsion bar cover plate.
3. NOTE: Before relieving the torsion bar tensions, measure and record the measurement of the torsion bar adjustment bolt. This measurement will
be used as the preset depth for the new torsion bar adjustment bolt during installation.
Measure and record the length where indicated.
4. Relieve the torsion bar tension.