Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
1
Position the Torsion Bar Tool and the adapters.
2
Tighten the Torsion Bar Tool until the torsion bar adjuster lifts off of the adjustment bolt.
5. CAUTION: The torsion bar adjustment bolt is coated with drier adhesive. A new bolt must be installed if it is backed off or removed. Failure to
do so can cause the adjustment bolt to loosen during operation and result in a loss of vehicle alignment.
Remove the torsion bar adjustment bolt and nut.
6. Loosen the torsion bar adjustment tool until the tension is off the torsion bar.
7. Reposition the anti-lock sensor wire.
1
Remove the front brake anti-lock sensor wire bracket bolt.
2
Reposition the anti-lock sensor wire.
8. CAUTION: Secure the front axle shaft to prevent it from overextending. Failure to do so can cause damage to the front axle shaft.
