ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 8719 > < Air Bag Disarming and Arming|Page 8717
Page 6
background image

Vehicles with seat side air bags

20. Remove the tie-strap and disconnect the passenger seat side air bag electrical connector.

21. Attach the restraint system diagnostic tool to the passenger seat side air bag floor electrical connector.

22. Remove the tie-strap and disconnect the driver seat side air bag electrical connector.

23. Attach the restraint system diagnostic tool to the driver seat side air bag floor electrical connector.

All vehicles

24. Install the RCM fuse F2.6 (7.5A without rear blower, 15A with rear blower) to the CJB and close the cover.
25. Connect the battery ground cable. For additional See: Starting and Charging/Battery

Reactivation Procedure

Reactivation

All vehicles

Air Bag Disarming and Arming|Page 8719 > < Air Bag Disarming and Arming|Page 8717