Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Turn the steering gear input shaft to the right until the stop is reached. Note the number of turns.
2. NOTE: Make sure the steering gear control valve housing is turned toward the front of the vehicle.
Install the steering gear into the RH opening of the crossmember.
3. Move the steering gear as far to the RH side of the vehicle as possible.
4. Move the LH front wheel spindle tie-rod into the opening in the crossmember and move the steering gear into position.
5. To place the steering gear in the straight ahead position, turn the steering gear input shaft to the left by half the number of turns recorded
previously.
6. Rotate the steering gear control valve housing toward the rear of the vehicle.
