Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
8. Disconnect the appropriate solenoid electrical connector.
1. Disconnect shift solenoids electrical connectors.
2. Disconnect the Torque Converter Clutch (TCC) solenoid electrical connector.
3. Disconnect the Electronic Pressure Control (EPC) solenoid electrical connector.
9. CAUTION:
^
The TCC solenoid and converter modulator valve may pop out of its bore. This may damage the solenoid or converter modulator valve.
^
Shift Solenoid (SSC) may pop out of its bore. This may damage the solenoid.
Remove the shift solenoids.
1. Remove the wire harness.
2. Remove the solenoid clamp screws.
3. Remove the solenoid clamp.
4. Remove the appropriate solenoid(s).
Installation
1. Install the new solenoid(s).
2. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
