Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
6. Tighten the intermediate band locknut.
1. Hold the screw stationary.
2. Tighten the intermediate band locknut.
7. Install the digital TR sensor.
1. Position the digital TR sensor.
2. Loosely install the screws.
8. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
NOTE: The manual lever must be in the NEUTRAL position. Using the special tool, align the digital TR sensor and tighten screws in an
alternating sequence.
9. Install the manual control outer lever.
1. Install the manual control outer lever.
2. Install the manual control outer lever nut.
