Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
5. Remove the ignition switch lock cylinder.
1. Rotate the ignition switch lock cylinder to the RUN position.
2. Press the lock cylinder release pin and remove the ignition switch lock cylinder.
6. Remove the lower steering column shroud.
1. If so equipped, remove the tilt wheel handle and shank.
2. Remove the three screws.
3. Remove the lower steering column shroud.
7. Remove the upper steering column shroud.
8. Disconnect the Transmission Control Switch (TCS) harness connector.
