ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Wiring Harness, A/T|Service and Repair|Page 6308 > < Wiring Harness, A/T|Service and Repair|Page 6306
Page 3
background image

Remove the transmission case (16 pin) electrical connector retaining spring.

11. CAUTION:  Do not damage the connector or harness.

Remove the transmission case (16 pin) electrical connector.
^

Compress the tabs on the transmission case (16 pin) electrical connector.

^

Push the transmission case (16 pin) electrical connector out of transmission case.

Installation 

1. NOTE: 

^

Make sure the tab is in the lock position.

^

Install new O-rings on the transmission case (16 pin) electrical connector.

Install the transmission case (16 pin) electrical connector.
^

Lubricate the transmission case (16 pin) electrical connector O-rings with petroleum jelly.

Wiring Harness, A/T|Service and Repair|Page 6308 > < Wiring Harness, A/T|Service and Repair|Page 6306