Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
5. Install the EPC and SSB solenoids.
6. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp.
1. Position the solenoid clamp on the main control valve body.
2. Install the solenoid clamp screws.
7. Connect the SSA and SSC shift (SS) solenoid electrical connectors.
8. Connect the TCC, SSD, SSB, and EPC solenoid electrical connectors.
9. CAUTION: Excessive pressure may break the retaining pins.
