Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
4. Using a suitable puller, remove the flange.
5. Remove the oil seal if it remains on the rear output shaft.
Installation
1. Install the oil seal in the flange.
2. CAUTION: Align the index marks.
Position the flange on the rear output shaft. If necessary, reseat the oil seal in the flange.
3. Using the special tool, install the Range. Tighten the nut on the special tool to 54 Nm (40 ft. lbs.) to seat the flange on the shaft.