Explorer Sport Trac 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Rear Door Window Motor: Service and Repair
Rear Window Glass Motor
REMOVAL
1. Remove the C-pillar trim panel.
2. Position the rear of the carpet aside.
3. Remove the water shield from over the rear window glass motor and discard.
4. Remove the rear window motor.
1
Disconnect the electrical connector.
2
Remove the bolts.
3
Remove the rear window glass motor.
CAUTION: Use care not to damage the drum housing when removing the rear window glass motor.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: The rear window motor must be initialized after a repair is carried out.