Explorer Sport Trac 4WD V6-4.0L (2009)
Seat Cushion Cover - Second Row, 60 Percent, E-Z Entry
Seat Cushion Cover - Second Row, 60 Percent, E-Z Entry
Removal
1. Remove the 2 screws and the latch feet release bar.
2. Release all the cushion trim cover retainers and pin-type retainers.
3. NOTICE: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the
cushion foam pad.
Release the hook-and-loop strips and separate the cushion trim cover from the cushion foam pad.
4. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To install, reverse the removal procedure.
-
Make sure the lower anchor and tethers for children wires at the rear of the cushion frame are positioned through the cushion trim cover and
accessible for use after installation.
