ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8434 > < Initial Inspection and Diagnostic Overview|Page 8432
Page 9
background image

E3-E5

NOTE:  The outside air temperature display is only available in base instrument clusters without electronic automatic temperature control (EATC).

Normal Operation

The outside air temperature sensor is hardwired to the instrument cluster through circuits VH407 (YE/GN) and RMC32 (GN/BU). The message center
displays the outside air temperature upon receipt of the outside air temperature data.

DTC B1255 - is a continuous and on-demand DTC that sets if the instrument cluster detects an open on the outside air temperature sensor input circuit
VH407 (YE/GN). If the instrument cluster detects an open on the outside air temperature input, the instrument cluster defaults the display to 23.5°
Celsius (75°F)
.

DTC B1257 - is a continuous and on-demand DTC that sets if the instrument cluster detects a short to ground on the outside air temperature sensor
input circuit VH407 (YE/GN). If the instrument cluster detects a short to ground on the outside air temperature input, the instrument cluster defaults

Initial Inspection and Diagnostic Overview|Page 8434 > < Initial Inspection and Diagnostic Overview|Page 8432