Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
Trunk / Liftgate Interior Trim Panel: Service and Repair
LIFTGATE TRIM PANEL
Removal and Installation
1. Remove the 2 liftgate grab handle screws.
2. Remove the liftgate grab handle.
3. CAUTION: To avoid damaging the trim panel, do not pull the bottom of the panel outward.
Lift the liftgate trim panel by lifting upward to disengage the clips and remove the panel.
-
Disconnect the liftgate trim panel electrical connector.
4. To install, reverse the removal procedure.
