Explorer Sport Trac 4WD V6-4.0L VIN E (2007)
7. Disconnect the SRS seat position sensor.
8. Driver seat with 10-way power, disconnect the backrest power feed electrical connector and route out the wire harness.
-
Release any wire harness retainers.
Heated seat
9. NOTE: Passenger seat shown, driver seat similar.
Disconnect the cushion and backrest heated seat mat electrical connectors.
All seats
10. Release the pin-type retainers, disconnect and route out the side air bag module electrical connector and wire harness.
11. Remove the safety belt buckle and pretensioner electrical connector cover.